30A PID Temperature Controller IPB-26
Fast Free Shipping
Worry free Warranty
Lifetime Customer Support
Dual operation mode
The IPB-26 PID controller support heating function and water pump function. And the controller is equipped with 2 displays and show the SV value and PV value at the same time. The output temperature support both Fahrenheit and Celsius unit.
Designed for up to a 5500 watt element, requires a 4-prong 30amp receptacle with GFCI Protection, comes with a highly accurate temperature sensor, equipped with an 8 foot long power cord, heat up in quick speed.
Great heat dissipation
The controller has adopted high quality aluminum cooling fin which helps the heat dissipation during the working process.
The controller cabinet lock should be locked before running the controller and the controller also supports alarm function, you could set an alarm temperature value and it will alarm to remind you when the controller reaches the value. The controller is grounded.
The IPB-26 PID controller designed different buttons for different functions, you could control it easily with our manual. You can also contact us if you meet problems, we will reply as soon as possible.
Dual operation mode: INKBIRD PID Temperature Controller IPB-26 supports heating function and water pump function;
SV and PV value display: it displays the SV value and PV value at the same time, easy to read and monitor.
No reading confusion: INKBIRD PID Temperature Controller IPB-26 supports both Celsius and Fahrenheit reading methods, it can be switched based on our reading habits for no reading confusion.
Highly accurate temperature sensor: it is up to a 5500 watt element and requires a 4-prong 30amp receptacle with GFCI Protection for a highly accurate temperature sensor.
Rapid heat-up: INKBIRD PID Temperature Controller IPB-26 is equipped with an 8 foot long power cord for rapid heat-up.
Great heat dissipation: it adopts high quality aluminum cooling fin which dramatically improves the heat dissipation during the working process.
Alarm for safety: INKBIRD PID Temperature Controller IPB-26 supports alarm setting, which allows us to set an alarm temperature value and alarm us once the set temperature is reached.
Safety notice: ITS cabinet lock must be locked before use.
Get the user manual here.
Probe Cable Length: 10ft/3m
Power Cord Length: 8ft/2.4m
Input Voltage: AC 240V 60Hz
Heat Output Voltage: AC 240V 60Hz
Pump Output Voltage: AC 120V 60Hz
Maximum Current: 30A for 240V AC
Heat Output: Built-in optical isolated SSR of the output switch device with no-voltage crossbar switch.
Pump Relay output: AC 120V 8A(resistance load)
Pump Relay electric life: 100000 times
Character display: PV/SV: 20.40 character height red high light LED
Sensor Type: NTC sensor(R25℃=10KΩ)
Temperature Resolution: 0.1 or 0.1
Temperature Control Range: -50℃~125℃/-58~257℉
Unit display: Celsius or Fahrenheit
Sampling period: 0.5 second
Working environmental temperature: -10℃~55℃/14℉~131℉(no freeze or condensation)
Working environmental humidity: RH 35-85%
Storage environmental temperature: -25℃~65℃/-13℉~149℉(no freeze or condensation)
Package Contents: IPB-26 PID Controller*1 Probe*1 User’s Manual*1 Warranty Card*1
I built a CIP cart for my brewery. The InkBird is easily installed and regulated the temperature the way it should. If you have a high delta leg, be sure not to run 208V to the pump.