Inkbird

Inkbird Wi-Fi Aquarium Temperature Controller ITC-306A with Dual Probe

$49.00

Wifi & Free APP : Pair the controller with your phone via 2.4GHz Wi-Fi, the device will alarm if there are exceptions. And all exceptions will be updated to the APP, the app will push notifications to remind you. (APP: ☞InkbirdSmart)
Dual Protection : Equipped with 2 relays(current relay) to ensure that the power can be turned off under any abnormal circumstances, will protect your fish from being hurt by overheated water.
Continous Heating Alarm :The heating time can be set according to your needs from 1 hour to 72 hours. The controller will alarm once the water can not be heated to the setting temperature within the specified time. The temperature setting range is 20.0℃~35.0℃/68.0℉~95.0℉ and the measure temperature range is -40℃~100℃/-40℉~212℉.
Easy to use : Plug and Play. The 10A programmable and prewired aquarium thermostat is compatible with most kinds of heaters, no need to assemble the product yourself, just plug and play.
Dual probe for safety :The aquarium heater controller will alarm once the temperature difference between 2 probes is more than 5℉(3℃), and the app will push a notification at the same time. To protect your fish in a more safet environment.

Main features:

Plug and play, easy to use
Dual relay controlling, one for control output, another for abnormal protection
Support Celsius and Fahrenheit reading
Dual display window for simultaneous display of measured temperature and stop heating temperature
Dual temperature probes to ensure the accuracy of the water temperature
Temperature calibration
High and low temperature alarm
Probe abnormal alarm
Continuous heating time alarm

Specification

Voltage: 100~240Vac 50/60Hz
Current: 10A Max
Wattage: 1200W(120Vac), 2200W(220Vac)
Type of temperature probe: R25℃=10KΩ±1%； R0℃=26.74~27.83KΩ；B25/85℃=3435K±1%
Temperature control range: 20.0℃~35.0℃/68.0℉~95.0℉
Temperature measurement range: -40.0℃~100℃/-40.0℉~212℉
Temperature display accuracy: 0.1℃/℉(<100℃/℉), 1℃/℉(>=100℃/℉)
Display unit: Celsius ℃ or Fahrenheit ℉
Ambient temperature: -20℃~40℃/-4.0℉~104℉S
torage environment: Temperature: 0℃~60℃/32℉~140℉;Humidity: 20~80%RH (Unfrozen or condensation state)

The device ONLY supports 2.4GHz Wi-Fi router!

Please follow the steps to pair the temperature controller with your phone.

Dimensions

Size: 170*68*32mm
Please note that both sensors have to be in the same tank.

Alarm Notification

When there is a alarm, the app will push a abnormal alarm notification to your smart phone immediately.

Package Contents

1 x ITC-306A WiFi Temperature Controller
1 x User manual
1 x Brand card

Inkbird Wi-Fi Aquarium Temperature Controller ITC-306A with Dual Probe

A must have. Makes heaters easier to control.

This is a lifesaver, and gives me a lot more confidence that the temperature will be set correctly, and that heaters are working. Minus 1 star because the App does not get alarm notification, and cannot disable the audible alarm. The App should display separate stats for the 2 heaters so I can have confidence that both heaters are working correctly.

Excelente

Excelente producto

Works Great!!!

Had a little issue with it at first but got it up and running and is working great.

Works great but needs tweaked a little

The device works great. The only thing is the application I'm using it for the temp range needs to be below 68 degrees .it is being used as a bait tank heater controller. So I'm just using it to monitor the temp because I have my tank at 60 degrees and it will not set below 68 degrees. I'm having to use another brand of a controller that will go down below 68 degrees. Other than that it works great. Would love some feedback from Inkbird on this.

Thanks for your good advise, the new version of 306a has solved this problem

Inkbird Wi-Fi Aquarium Temperature Controller ITC-306A with Dual Probe

Customer Reviews