Inkbird IBS-P01R Wireless Indoor & Outdoor Floating Pool Thermometer

Specifications

●Battery: 2*AAA 1. 5V (Temperature and humidity monitor, 2*AA 1. 5v(Wireless remote sensor)
●433Mhz Transmission Frequency
●Transmission distance: up to 300 ft in open space,if there is interference, the transmission distance will be limited
●Wireless remote sensor supports up to three channels and waterproof function (IPX7)
●Temperature and humidity monitor temperature measurement range:-40℃c~60℃(-40F~140°F)
● Temperature measurement accuracy:±1.0℃(±1.8°F)
Temperature display accuracy: 0.1C(0.1F)
● Humidity measurement range: 10%-99%
● Humidity measurement accuracy:±5%
● Humidity display accuracy:1%
● Wireless remote sensor temperature measurement range:40℃~70℃(-40°F~158°F)
● Wireless remote sensor temperature measurement accuracy:±1℃(±1.8°F)
● Wireless remote sensor temperature display accuracy:0.1℃(0.1°F)
● Temperature sampling period: 10 seconds
● Exceed the range will display " HH.H" LL.L"
● Warranty:1year

MAX/MIN/CLEAR:
Quickly press: press to display the maximum minimum temperature. When there is no button operation, the current temperature display will be restored after 30s.
Long press(5s): long press to clear the maximum inimum temperature record value, then re-record.
● TX
Quickly press: send temperature data to the Temperature and humidity monitor, when the transmission is successful, the red light of wireless remote sensor will flash once.
Long press(5s): reset the synchronization between the Wireless remote sensor and the Temperature and humidity monitor. Sensor displays CH8, indicating that the reset is successful.
After resetting, the wireless remote sensor needs to be powered on again (Can be synchronized within 2 minutes after the wireless remote sensor is re-powered on)
When synchronizing try to make the Wireless remote sensor close to the Temperature and humidity monitor and please do not press any button.
● Flexible
add an Inkbird M1 WiFi Gateway (sold separately) to pair with Pool Thermometer for data and alerts via the Internet.

Button Icon Description
● CH/R:

• Quickly press: press to switch the current channel and the wireless remote sensor can be fixed in the current channel.
• When switching to"CH8", after 5s, the temperature and humidity of Wireless remote sensors will be displayed in turn, each will show 5 seconds.
• Long press(5s):It can reset the synchronization between the Temperature and humidity monitor and all Wireless remote sensors. After resetting, the Wireless remote sensor needs to be re-powered (Re-install the battery) before it synchronize with the Temperature and humidity monitor. (within 2 minutes).

• When in normal working mode, press to switch(Temperature and humidity monitor and Wireless remote sensors) temperature unit to°C or°F
• When the display is showing the maximum minimum temperature(press MAX/MIN/CLEAR button to display the maximum minimum temperature), press to switch the maximum and minimum recording time interval of temperature to ALL-TIME or 24 hours.

Other Version：Normal Version, Bluetooth Version