【Double Outlets】Pls plug CO₂ regulator or generator into WORK1, exhaust fan into WORK2. 【Programmable】Controls the CO2(ppm) within the desired range and supports calibration and alarms 【Plug-n-play】The CO2 controller will turn on/off the device when reaches the desired CO2(ppm) level. 【Digital Display】Both the measured CO2 and the desired CO2 are (ppm)displayed on the CO2 Controller 【Reliable】CE&FCC certificated. S01 Sensor is suitable for home growing and HVAC Equipment. (Comparison: B01 Sensor)
Main Features of ICC-500T CO₂ controller with S01 sensor
Plug and play, simple operation.
Dual relays, are able to connect with the CO₂regulator or generator and the exhaust fan simultaneously.
Dual readouts, displays the current measured CO₂ concentration and the set
CO₂ concentration simultaneously.
Programmable high/low CO₂ concentration alarm.
Widely applied in ventilation system, building control and HVAC equipment.
Specification of ICC-500T CO₂ Controller
Input Power: 100~240Vac 50/60Hz 10A MAX
Output Power: 100~240Vac 50/60Hz 10A MAX
Disconnection Method: Type 1B
Rated Impulse Voltage: 1500V
Automatic Operation: 6000 cycles
Working Environment: room temperature
Storage Temperature: 0℃~60℃/32℉~140℉
Storage Humidity: 20~80%RH (No freezing or condensation)
Warranty Period: 2 years
Measurement Range: 0~9,999 ppm
Sensing Method: NDIR
Sensor Working Temperature: 0℃~50℃/32℉~122℉
Working Humidity: 0~95%RH (non-condensing)
Calibration Method: CO2 reading calibration(current CO2 concentration Value+CO2 calibration value)
Error: ± (30 ppm+3% MV)--S01 Sensor
Response Time (63%): 20 seconds---S01 Sensor
Plug the CO₂ Controller and the sensor
When the CO₂ sensor is inserted, the controller will take about 8 seconds to identify. Then the PV window will display 8888 and blink, the SV window will display the CO₂ concentration setting.
Waiting for about 120 seconds
After 120 seconds, CO₂ module works stably, and the PV window stops blinking and displays the measured CO₂ concentration. Within 120 seconds, the buttons cannot be operated , the indicators of WORK1 and WORK2 are off, and the WORK1 and WORK2 have no output.
Plug your devices into the socket of ICC-500T
The controller will automatically identify and convert the CO₂ regulator or generator and the exhaust fan. WORK1 is the output of the CO₂ regulator or generator, and the WORK1 indicator is the WORK1 output status indicator. WORK2 is the output of the exhaust fan, and the WORK2 indicator is the WORK2 output status indicator.
WORK1 Only for the CO₂ regulator or generator, WORK2 Only for the exhaust fan.
Follow the instructions to finish the setting
There are three modes can be set, for more information about setting, please refer to the user manual.